How to install vanity light junction box

Sorry for the bad advice! There is more than one way to mount a light on a box; some of them are designed to be held in place with only one attachment point. I've installed really wide fixtures where the hidden mounting plate screwed directly to the wall.

While it would be nice for the OP to be able to attach both bolts to the box, I don't know of any code language that says how a fixture must be attached. The main issues are that the connections are properly made and wire-nutted, are within the box, that the wires aren't pinched or stressed, and the box is fully covered. Doing this as Vith described should be completely safe. I doubt that any inspector would have a problem with it as long as the fixture was securely in place.

Fan box. Found one realistic price on menards. If this is on a partition wall, not a supporting wall, the errant stud is doing nothing but holding up drywall. It can still do this even if you hack into it and move the box.

Indem Sie weiterhin auf der Website surfen bzw. Mehr erfahren. Small-Space Living. Kitchen and Dining Seating. Living Room and Entryway Seating. Sign In. Join as a Pro. Houzz TV. Houzz Research. Looking for the perfect gift?

Send a Houzz Gift Card! Electrical Wiring Lighting Bathrooms. Bathroom vanity junction box not centered. Colleen M 4 years ago. Email Save Comment Featured Answer. Like 3 Save. Sort by: Oldest. Newest Oldest.

I'm pretty sure you can't. Like 1 Save. Many vanity lights are similar in wiring and parts, but yours may be slightly different. Ours came with a mounting bracket that held the wire connectors.

If you have a t-bracket and wires that need to be stripped, check out my installation of a basket pendant which may help in your instruction. First, secure the mounting bracket, to the junction box by fastening the screws provided on the sides, into the holes on the pan box. Next, insert the white, green, and white wires the ones from behind your wall into their designated spots on the bracket.

Then, insert the wires from the fixture into their designated spots as well, on the mounting bracket. There are separate holes to connect each wire from both your wall and fixture. Hence why it was impossible to get a photo of this in action. Below you can see the wires on the fixture. Now you have a new vanity light AND junction box, both installed by you. Yes, this is your moment to pat yourself on the back and be proud, so take it! As you can see, this can be a simple project if you have the right tools, and conduct each step safely.

I hope you feel a little more confident and equipped to upgrade the other vanity lights in your home too. Are you upgrading your bathroom or powder room with new fixtures? If so, let me know below if your install was easy, or had any hiccups like ours. All Rights Reserved. This post may contain affiliate links, which means I may receive a commission on purchases made through the links below.

Read the full disclaimer here. Squeeze the light lightly and level it before total locking. While thoroughly attaching and mounting the new lamp, ensure that the wall switch is switched off. Turn the separate breaker and guarantee it remains on for 10 seconds until turning to illumination.

Check the lighting with a button on the wall. A light fixture can be mounted to drywall, but it would require the use of a toggle bolt and special brackets. Yes, they are necessary.

Junction boxes can be used to connect any number of electrical wires together in order to control the flow of electricity and make it safe for the wiring. Junction boxes are typically made out of metal and may have a screw-on one side that allows them to be mounted onto a wall or ceiling.

You can create your own junction box by drilling holes in the wall and connecting wires with zip ties. A junction box is an electrical device that joins two or more circuits, providing a means of making the circuit complete. If you are wiring your home, you will need to use a junction box for all of the wires. If this happens, your house could be in danger and become unsafe for residents to live in. To get a snug fit, you may need to make some adjustments. There are shallow, square, round, rectangular, weatherproof, and extension boxes.

More detail here. You should not continue the installation. Instead, it is best to contact the place where you purchased this vanity light and request an exchange. It depends on the size of the junction box. Junction boxes play a vital role in electrical installations.

Indeed, their beneficial functions are as follows:. Unfortunately, you have no choice when it comes to how to install vanity light without a junction box. Remember that your safety is always a top priority.

If you are unsure about working with electrical equipment, it is best to hire a trusted electrician.