If the drive has an exposed control board on the bottom of the Blu-ray drive, the Blu-ray drive's model number is KEM If there is no exposed control board, then the Blu-ray drive's model number is KEM If your PlayStation 3 is not reading discs, or is reading discs inconsistently, then follow this flow chart to fully diagnose the problems with your Blu-Ray Drive.
Step 1. Insert a disk into the PlayStation 3 Blu-ray Drive. Step 2. Clean the Disk - Using a cleaning solution and a microfiber cloth, clean the disc. Realigning the gears in the blu-ray drive is fairly simple. Depending on the type of Blu-ray drive you have, you will need to either follow this guide or this guide. If your IR Sensor is no longer working, you can attempt to replace it, however, it will in no way affect the performance of your Blu-ray drive.
If you have judged that the Control Board is no longer functioning properly, then you will likely need to send your PlayStation to Sony. The Control Board is paired to the Motherboard and will only work with its original partner board. If everything is working great, then you no longer need this troubleshooting guide.
Being a very fragile piece of technology, it is easy for the lens to break. Both types of Blu-ray drives have a specific lens that will only work with that type of drive. If your PS3 freezes, turn off the game system by holding down the power button. Turn it back on by pushing the power button again. If you have continuous, excessive lag during online play, you should first verify that the ethernet cable is properly plugged in.
Error 2: There has been a glitch with the WiFi chip inside your radio. Contact C. Crane customer support for further assistance. Try scanning for networks again on your radio. You must have access to nearby WiFi to operate the radio except in Bluetooth mode. As a test, move closer to the WiFi router that you are attempting to connect to. If they are not on, you may need to call the manufacturer of the router for more assistance. Most new routers have dual band. Please make sure that the 2.
This is usually enabled by default on most routers. This must be enabled. You may need to call the manufacturer of the router for more assistance. Error 4: The radio has connected to the WiFi signal but cannot access the Internet. Since the radio does not have a web browser you may need to speak with the hotel technical staff about allowing the radio to connect. Try connecting to the same WiFi network with another device such as a smartphone or tablet and browse the internet as a test.
If the internet is working, then you can rule out this as the problem. If you have saved preset stations, then try playing one.
If the station does not play, then you can furthermore assume that the router does not have internet. If the station does play, then there may be a temporary problem with the radio station server.
Wait some time before browsing the radio for new stations. Error 5: The Internet and WiFi is working but the Skytune stations list is not responding making it impossible to browse for new stations. You should however have access to your saved radio station presets. Wait a few minutes and try again later. This problem should not last long. After a few unsuccessful tries, the radio will offer a backup list of saved stations.
There may be maintenance underway. Part 2. Select connection method. A menu will pop up asking whether you want wired or wireless. If you want a wired plug an Ethernet cable into the back of the system and everything will automatically set.
Press wireless for WiFi. Choose WLAN settings. The easiest is to hit scan and choose your network name from the list that pops up, but you can also type in the name of yours manually, or use the connect automatically button on the back of your router. The option to change your SSID presents itself if you wish to. If not, hit the right arrow key to continue. Choose security. Enter your password. If your internet has a password hit the X button and enter it into the popup menu.
When done hit the right arrow key. Save your settings. Hit X again to enter your settings into the system and save them.
Optional test connection. If you want to make sure your internet is working properly hit the X button when prompted If not just hit the back button, you're done. A menu will pop up showing you. Whether it was able to obtain the IP address. Whether it was able to connect to the internet. Whether it was able to connect to the Play Station Network server.
Whether UPnP was available or not. The NAT type. The connection speed in Mbps, for downloads. The connection speed in Mbps, for uploads. Part 3. Select IP address setting. Automatic, manual, or PPPoE are the options. Scroll and hit the right arrow key when you've found the right one. Select DHCP host name. In most cases, this doesn't need to be changed. Set or do not set and press the right arrow key.
Select DNS Setting.
0コメント